85 Photos
Louisville, MS
2,073 hrs
CJ000503
Loading...
An inspection report will be available soon. Please check back later.
ID number
#13408552
In yard
No
Year
2015
Manufacturer
Model
Asset type
Serial number or VIN
CJ000503
Features
Tier 4, 2011 US EPA Label, Kubota V2403 4 Cylinder 36.5 kW 2.4 L Diesel Engine, Rubber Tracks, 5 ft 7 in Long x 1 ft 4 in High Dump Body
Notes
COMES WITH IRONCLAD ASSURANCE. SUBJECT TO MISSISSIPPI SALES TAX.
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CJ000503
CE Mark
CE Marked
Hour Meter / Odometer
2073.3 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational, battery light stays on light stays on
Gauges
Operational, water temp gauge gauges are inoperable
Limited Function Check
The main components are in place and operational as noted.
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks Oil pressure sensor has seepage
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Right Side
Limited Function Check
The engine started and ran.
Transmission
Operational
Service Brakes
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Bed Body
Tailgate
Tailgate Latch
Missing
Support Frame
Hinge Points
Limited Function Check
The main chassis components were operational in a limited check.
Left Roller Frame
Left Track Tensioner
Left Grouser Height
32 mm
Left Carrier Rollers
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Grouser Height
32 mm
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket
Items must be paid in full by Friday, May 30, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.