



81 Photos
Located
Abilene, TX
Abilene, TX
Usage
4,526 hrs
4,526 hrs
Serial number
HHKHFV17AF0000181
HHKHFV17AF0000181
Loading...
ID number
#15685784
In yard
No
Features
2 Stage Mast, 158 in Max Lift Height, 97 in Lowered Mast Height, 47 in Forks, Auxiliary Hydraulic Plumbing, Side Shift, Solid Pneumatic Tires, Tier 4, 2014 US EPA Label, Kubota V3800-CR-T 4 Cylinder 69.2 kW 3.8 L Diesel Engine
Notes
COMES WITH IRONCLAD ASSURANCE. SUBJECT TO TEXAS SALES TAX., COMES WITH IRONCLAD ASSURANCE. SUBJECT TO TEXAS SALES TAX.
















Serial Number / VIN
HHKHFV17AF0000181
CE Mark
No CE mark found
Hour Meter / Odometer
4526 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational, Some not operational, 5 lights are not operational


Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual















Mirrors
Seats/Armrests
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.












Emissions Status
2014 US EPA Label
Emission Label
Blow-by (subjective visual observation)
Video capture could not be performed
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.





Transmission
Operational
Inching Brake
Inoperable
Front Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.












Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Capped off, Not operationally checked, Front
Steering Cylinders
Mast Lift Cylinders
Mast Tilt Cylinders
Side Shift Cylinder
Limited Function Check
The hydraulic system was operational.



















Mast/Boom Condition
Chain / Tensioners
Carriage Rollers and Guides
Load Back Rest
Side Shift
Forks
Broken tip
Steering Linkage
Frame Condition
Master Cylinder/Brake Control
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Oil Sample Analysis
| engine | transmission | |
|---|---|---|
| date of analysis | Aug 06, 2026 | Aug 06, 2026 |
| Silicon | 1.4 PPM | 8.39 PPM |
| Tin | 3 PPM | 1.41 PPM |
| Silver | 0 PPM | 0.06 PPM |
| Aluminum | 18.82 PPM | 13.09 PPM |
| Chromium | 0.06 PPM | 0.15 PPM |
| Lead | 0.81 PPM | 1.46 PPM |
| Copper | 22.17 PPM | 131.81 PPM |
| Nickel | 0.05 PPM | 0.38 PPM |
| Iron | 3.25 PPM | 86.45 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | >5% | N/A |
Items must be paid in full by Saturday, August 29, 2026. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.