100 Photos
Louisville, MS
3,193 hrs
CE000842
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12548015
In yard
No
Manufacturer
Model
Asset type
Serial number or VIN
CE000842
Features
Enclosed Cab, Tier 2, 2018 US EPA Label, Mitsubishi 6 Cylinder Diesel Engine, 44 ft Sheave Height, 26250 lb Capacity, Rear Mounted, 33 ft Reach, Insulated Upper Boom, 18 in Auger, Pole Guide, Auxiliary Hydraulics, Turret Mounted Winch, One-Man Basket, 10 ft 0 in Body, X-Type Outriggers, Rear Outriggers, Bumper Mounted Winch, Hydraulic Hose Reel, 24 in Rubber Tracks
Notes
ITEMS AT OFFSITE LOCATION MUST BE PICKED UP BY JANUARY 3RD OR WILL BE SUBJECT TO 3RD PARTY STORAGE FEES
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CE000842
Hour Meter / Odometer
3193 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Some not operational, 1 lights are not operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Not equipped
Current Safety Manual
Current Operator/Maintenance Manual
Seats/Armrests
Mirrors
Steering Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Heater
Operational, Fan only works on 1 speed
Limited Function Check
The main components are in place and operational as noted.
Emission Label
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Transmission
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Pumps (Hydraulics)
Hydraulic Tank
Hoses
Auxiliary Hydraulic Plumbing
Not operationally checked
Limited Function Check
The hydraulic system was operational.
Bed Body
Support Frame
Valves
Hoses (Hydraulic)
Worn hoses
Swing Motor
Boom Lift Cylinder(s)
Boom Extension Cylinder
Stabilizer Cylinders
Boom Wear Guides
Boom Condition
Cable Tray Ladder
Turntable Bearing
Stabilizer Beams
Stabilizer Controls
Work Basket
Not installed and not tested
Control Console
Hydraulic Controls
Winch control sticks
Gauges
Operational
Limited Function Check
The hydraulic system was operational.
Roller Frames
Grouser Height Measurement
Left side: 32 mm, Right side: 31 mm
Track Belt Condition
Damage to the inside of the track belts, Normal wear
Rubber Belt Drive Lugs
No visible damage
Track Tensioners
No visible damage
Carrier Rollers
Rear idler wear
Track Rollers
Sprockets
Oil Sample Analysis
engine | hydraulic | |
---|---|---|
Iron | 5.21 PPM | 3.23 PPM |
Glycol | NEG | N/A |
Water | NEG | N/A |
Fuel | <5% | <5% |
date of analysis | Dec 04, 2024 | Dec 04, 2024 |
Silicon | 9.57 PPM | 1.21 PPM |
Tin | 0 PPM | 0 PPM |
Silver | 0 PPM | 0.01 PPM |
Aluminum | 1.73 PPM | 0.45 PPM |
Chromium | 0.21 PPM | 0.68 PPM |
Lead | 1.01 PPM | 0.04 PPM |
Copper | 2.74 PPM | 88.87 PPM |
Nickel | 0.17 PPM | 0.12 PPM |
Items must be paid in full by Friday, December 20, 2024. Late fees will be applied after due date.
Payment optionsGet free, no-obligation freight quotes on shipping. This item is eligible to be shipped via uShip, which is recommended for less-than-truckload (LTL) lots.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.