



135 Photos
Located
Effingham, IL
Effingham, IL
Usage
289,274 mi
289,274 mi
Serial number
1GB3KZC85FF136809
1GB3KZC85FF136809
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#13371716
In yard
No
Features
General Motors V8 6.6 L Diesel Engine, 2015 US EPA Label, 8715 Engine hrs, Air Conditioner, Cruise Control, Power Windows, Automatic Transmission, LT235/80R17 Front Tires, LT235/80R17 Rear Tires

































Serial Number / VIN
1GB3KZC85FF136809
Second Serial Number/VIN Photo
Hour Meter / Odometer
289274 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational





















Emissions Information
2015 US EPA Label
Emission Label
A/C Compressor
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Fuel System
Operational
Exhaust System
Diesel Particulate Filter
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.






















Engine Hours
8715 Engine hrs
Mirrors
Window Controls
Seats/armrests
Steering Control
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Gear Selector
Brake Control
Operational
Heater
Limited Function Check
The main components are in place and operational as noted.




















Steering Components
Steer Axle
Transmission
Operational
Frame Condition
Rear Drive Axle
Limited Function Check
The drivetrain was operational without a load.
Suspension Springs/Hangers
Suspension Bushings
Left Steer Tire
Left Rear Drive Tires
Right Rear Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs
Limited Function Check - Brakes
The service brakes are operational, The park brake is operational.







































Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | May 29, 2025 |
| Silicon | 8.61 PPM |
| Tin | 0.17 PPM |
| Silver | 0 PPM |
| Aluminum | 3.85 PPM |
| Chromium | 0.22 PPM |
| Lead | 2.79 PPM |
| Copper | 0.77 PPM |
| Nickel | 0 PPM |
| Iron | 16.6 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 2031. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.