




96 Photos
Cotulla, TX
11,224 hrs
CAT0140MCB9D02604
Loading...
An inspection report will be available soon. Please check back later.
ID number
#14428423
In yard
No
Year
2010
Manufacturer
Model
Asset type
Serial number or VIN
CAT0140MCB9D02604
Features
Enclosed Cab, Air Conditioner, Joystick Steering, 14 ft / 4.27 m Moldboard, Push Block, Ripper, 14.00-24 Tires



















Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT0140MCB9D02604
Hour Meter / Odometer
11224.5 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual



















Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted. Unit needed to be jump started to start away








Emission Label
None found
A/C Compressor
Operational
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Side of engine
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.









Transmission
Operational
Rear Drive Axle
Rear Tandems (Chain Drives)
Limited Function Check
The drivetrain was operational.













Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Articulation Cylinders
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Dripping leak on the left cylinder
Saddle Positioning Cylinder
Saddle Lock Pin
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.























Y-frame
Y-frame Pivot Trunnion
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins
Front Axle Oscillating Pin
Steering Linkage
Wheel Tilt Linkage
Belly Pans
Limited Function Check (grader)
The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Left Front: YOKOHOMA, Left Middle: YOKOHOMA, Left Rear: YOKOHOMA, Right Rear: YOKOHOMA, Right Middle: YOKOHOMA, Right Front: YOKOHOMA
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs





Blade Condition
Blade Cutting Edge Condition
Ripper
Missing middle shank
Items must be paid in full by Friday, December 26, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.