



81 Photos
Located
Corbin, KY
Corbin, KY
Usage
21,345 hrs
21,345 hrs
Serial number
CAT00D8TAKPZ03285
CAT00D8TAKPZ03285
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15334293
In yard
No
Features
Enclosed Cab, Air Conditioner, 154 in Wide Semi-U Blade w/ Single Tilt, Counterweight, Drawbar, Rear Auxiliary Hydraulics, 22 in Single Grouser Track Shoes












Serial Number / VIN
CAT00D8TAKPZ03285
Hour Meter / Odometer
21345 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Door glass door is cracked
Exterior Lights
Some not operational

Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
















Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Not operationally checked
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational; Maintenance/Service light stays on
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.











Engine
No US EPA Label Present
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.





Transmission
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.





Pumps (Hydraulics)
Valves
Hydraulic Tank
There is a dripping leak around the hydraulic tank. The source could not be determined.
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Capped off at rear. Not operationally checked
Blade Lift Cylinders
Heavy pin and bushing movement
Blade Tilt Cylinders
Limited Function Check
The hydraulic system was operational.







Blade Condition
Blade Cutting Edge Condition
Reversible-turned
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Heavy movement
Blade Trunnions/bushings
Heavy movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly Pans
























Pivot Shafts
Equalizer Bar Pivot Points
Heavy movement
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
77 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Left Front Idler
Left Rear Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
73 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Front Idler
Right Rear Idler
Right Sprocket
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jun 15, 2026 |
| Silicon | 3.92 PPM |
| Tin | 0.49 PPM |
| Silver | 0 PPM |
| Aluminum | 0.83 PPM |
| Chromium | 0.07 PPM |
| Lead | 1.33 PPM |
| Copper | 4.69 PPM |
| Nickel | 0.27 PPM |
| Iron | 28.09 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.